Temp Sensor

…is plugged into the main PCB inside the IQ2020 box then you will require the following HS-39205. The sensor has a cable length of 970mm and a thread width of 16mm (Larger than the Hi-Limit sensor). It is recommended to also replace the Hi-Limit sensor at the same time if replacing the temp sensor.

…in pool temperature sensor, used in Microspa, SSPA and MSPA gecko controllers (NOT MSPA-1 white metal box) also S-Class M-Class spa builder controllers 50mm bulb length and 10mm diameter, 3m wire length 4 pin connector with 3 wires (will also replace some 2 wire sensors used on the same models)…

Spa-Quip Mk2 in pool temp sensor. Used on Digital2000 D2000 controllers and SP1000 controllers. No Longer Available

Waterco Mk 2 Temp Sensor Probe. (in-pool sensor) This is designed to suit Portapac models post 2004. If pump is old then 2004 the original probe is no longer available and the new probe will not fit old sensor housing, so new housing WC-6381620 will have to be purchased along with new probe.

Spa-Quip Davey new style inpool temp sensor.Fits with a mini dim plug. Suits the following models: SP600 SP601 SP800 SP1200. This sensor is not required as these models have a in-line temp sensor. They are just used if the customer would prefer to monitor the in pool temperature instead of the…

 Spa-Quip Mk3 in pool temp sensor.Used in the following controllers SP750 and SP1000.Old style MK3 sensors had a white plastic face, all Mk3 sensors now have a grey plastic face.

Waterco Portapac Over temp / High limit sensor. Commonly used on the following models: 4555140, 4555141, 45551403, 45551413

Davey Spa-Quip in line Heater Temp Sensor. Fits the following models, SP400,54500, 500A, 500AMK2, SP600, SP601, SP800, SP1200.

Gecko MSPA-1 Temp Sensor (can not be used in any other model)

This can be used for both Gecko and Balboa sensor for a more accurate reading. Sensor requires a hole cut out of 22mm. The overall length of 75mm. Sensor probe should protrude slightly into spa from the sensor housing.

Includes: Sensor Probe 1/4" x 2" Bulb, Sensor Mount Cap, Bulb O'ring and Washer. Cable length is 310mm including plug for PCB. Left and Right sensors are exactly the same

Balboa sensor assembly. Containing two sensors a Hi-Limit and a Temperature Sensor which join to a single 4 pin connector. Temperature Sensor 96" Cord X 3/8" Diameter x 2" Length Bulb. Hi Limit Sensor 31" Cord x 1/4" Diameter x 1 1/2" Bulb. Balboa 30337 Also Replaces Balboa 30338

Pulsar and 2095 Series, Spa-Quip Aqua Pacfic in heater temp sensor

…plugged into the main PCB inside the IQ2020 box then you will require the following HS-39204. Sensor has a cable length of 970mm and a thread width of 12.5mm (Smaller than the Temp sensor). It is recommended to also replace the Temp(control) sensor at the same time if replacing the Hi-Limit sensor.

Sundance Spas In-pool temp sensor,suits most Sundance spas from 1992+. Sensor is normally fitted in the filter bay. 

Spa-Quip Davey Pulsar / 2095 Series 2.0kw Heater element.Used on Spa-Quip / Davey / Aqua Pacific / Ampac / Aquaswim controllers. Element comes with 2 X thermal overloads Water Sensor and Temp sensor. Also available in a 1.5kw model - Part Number: Q80024.

Pulsar / 2095 Series 2.0kw(15amp) Complete Element.Used on Spa-Quip / Davey / Aqua Pacific / Ampac / Aquaswim controllers.Element comes complete with 2 X thermal overloads- Water Sensor- Temp sensor- element dome, adaptor ring and lome.Element is also available in 1.5kw (10amp System).

Pulsar / 2095 Series 1.5kw(10amp) Complete Element.Used on Spa-Quip / Davey / Aqua Pacific / Ampac / Aquaswim controllers.Element comes complete with 2 X thermal overloads- Water Sensor- Temp sensor- element dome, adaptor ring and lome.Element is also available in 2.0kw (15amp System).

…element assembly. This element assembly is on controllers post 2016  Heater comes complete with titanium element, heater tube, water sensor, thermal overload and inheater temp sensor. Also available in 1.5kw and 2.0kw. Can also be retro fitted to controllers with the old style element assembly.

…element assembly. This element assembly is on controllers post 2016 Heater comes complete with titanium element, heater tube, water sensor, thermal overload and inheater temp sensor. Also available in 1.5kw and 3.0kw. Can also be retro fitted to controllers with the old style element assembly.

…element assembly. This element assembly is on controllers post 2016 Heater comes complete with titanium element, heater tube, water sensor, thermal overload and inheater temp sensor. Also available in 2.0kw and 3.0kw. Can also be retro fitted to controllers with the old style element assembly.

SP800 replacement 3.0kw heater element.Heater comes complete with heater tube, water sensor, thermal overload and inheater temp sensor.Also availabe in 2.0kw.

…is sold complete with: Heater/Control Box, 2 X 50mm unions, 1 X Touch pad and overlay, 1 X In pool temp sensor (you don't need to use the in pool sensor as there is a second sensor built into the control box)This Controller can be set up in the following configurations (Download user…

…is sold complete with: Heater/Control Box, 2 X 50mm unions, 1 X Touch pad and overlay, 1 X In pool temp sensor (you don't need to use the in pool sensor as there is a second sensor built into the control box)This Controller can be set up in the following configurations (Download user…