Gecko

Touch Pad with Overlay 6 Button Pump1, Pump 2, Blower, Light, Up, Down Used on SPA Controllers Face Size: 178 x 84 Hole Size 160 x 65

This can be used for both Gecko and Balboa sensor for a more accurate reading.Sensor requires a hole cut out of 22mm.The overall length of 75mm.Sensor probe should protrude slightly into spa from the sensor housing.

Gecko in pool temperature sensor, used in Microspa, SSPA and MSPA gecko controllers (NOT MSPA-1 white metal box) also S-Class M-Class spa builder controllers50mm bulb length and 10mm diameter, 3m wire length4 pin connector with 3 wires (will also replace some 2 wire sensors used on the same…

Touch Pad With Overlay 4 Button Pump 1 Pump 2 Light Up/Down Used on SPA and Microspa Controllers Face Size: 115 X 50 Hole Size: 83 X 22

Gecko SSPA Laing Style 2.0kw heater, (pressure switch not included) used on Heritage, Lanark, Southwest, Sierra Spas. Heater has a location to fit a pressure switch*Good idea to replace the pressure switch at the same time*

 Gecko IN.THERM Titanium Intellegent Heater. Matches IN.XM Control Systems. 3.8kw

Therm Products Universal Tefel coasted element. Sold in the following sizes: 2.0kw 2.5kw 3.0kw 3.6kw 4.0kw 5.5kw.Suits alomost all brands of USA made steel heater tubes, Balboa (including M7) Signature Spas, Gecko, Hydroquip, Pentair, Spaquip (Digital 2000 model)

Gecko MSPA-1 Temp Sensor (can not be used in any other model)

Gecko Aeware IN.K600 Overlay

Gecko Aeware IN.K450 Overlay

Gecko TSC-8 / K-8 overlay

Face Size: 220 x 107  Hole Size: 176 x 90 Overlay Part Number: A-9916-101381

Face Size: 180 x 73 Hole Size: 168 x 58 Overlay Part Number : A-9916-101335

1amp, 24V max, 1.5psi. Made in USA.

Gecko Colour Kinetics Multi Colour LED Light.Has 12 multi colour LEDs.Fits most 12v AC light fittings, this means it can replace the old lamp globe. 

Gecko Aeware IN.K200 touch pad including overlayFace Size: 120 x 50

Gecko replacement PCB, 230volt 50hz single or 3 phase. This PCB is a universal replacement PCB, Can be used with a flow-through heater or a laying heater (LA Spas and others). This PCB can run many different styles of 8 and 10 button touchpads.

Gecko M Class wrap around Laing Style heater, This heater can be step up in the following heater sizes 1.3kw 2.1kw 3.4kw 5.5kwHeater includes thermal overload

Touch Pad With Overlay 8 Button Used on MSPA Controllers Pump1, Pump2, Blower, Light, On/Off, Filter, Up, Down Face Size: 178 x 84 Hole Size 160 x 64

Balboa/Gecko 50mm heater union O'ringO'ring has one side with a slightly rounded edge and the other side a thicker square edge.O'ring is approximately 74mm in diameter, 6mm in total thickness(including the rounded and rectangular edges) and 2.5mm not including the raised edges

Gecko TSC-44 4 button Overlay to suit LA Spas. This Overlay has the following buttons: Jets, Light, Up and Down. 

Single speed JJ pump cordset.Commonly used on pumps that plug into older style Spa-Quip, Balboa and Gecko Controllers

Gecko K-72 8 button overlay(new wave style) to MSpa on LA Spas.Overlay is suited for 3 pump system.Overlay has the following buttons:Jets1, Jets2, Jets3, Light, Econ, Filter, Up and Down.Other overlays contain different button configurations.

Blower, Ozone and Circulation pump 1.0mm x 3.0m AMP overmoulded cord set.This cord set is used on Davey/Spa-Quip and SpaNET controllers.Due to overmoulded plug, it is unable to be used on Balboa, Gecko and Aeware units.