Balboa Spa Control

Supplied with a 4 button ovelay (3 Button overlay can be purchased at extra cost) Face Size: 110 x 40 Hole Size: 95 x 25

Balboa GS 501Z Printed circuit board. Note: It looks different to original PCB from the SCS501 controllers but it still fits properly and has the same functions. This PCB can have the following set up functions: 1. 1x Circ Pump, 1x 1 Speed Pump, 1x Blower, Ozone, Light. 2. 1x 2 Speed Pump, Blower,…

GL2000 MK3 with 3kw Heater. All 240volt outputs have AMP sockets The GL2000M3 can run the following options: Set up 1 1 x circ pump, 2 x 1 speed jet pumps,   1 x blower, 1 x ozone, 1 x AV (non switching 240volt output). 1 x 12V AC light  (You can not fit a 1speed jet pump without fitting a circ…

p>Face Size: 250 x 80 Hole Size: 210 x 55

Blower, Jets, Temp, Light  

…models of  Balboa 501 3kw spa packs also ideal to replace Sig 10 and Sig 10L spa controllers used by Signature Spas. Controller can be set up to run the following items: 1  Circ 1 Speed Pump- Blower -Ozone-Light 2  2 Speed Pump-Blower-Ozone-Light Kit Includes: 1 X GS501Z spa controller with 3kw…

Super E4 Duples LCD, Also sold as Signature SIG10 E4 Sold with 4 button overlay Face Size: 160mm x 56mm. Hole Size: 135mm x 35mm

Single speed 3m AMP overmoulded pump cord set. This cord set is used on Davey/Spa-Quip and SpaNET controllers. Due to overmoulded plug, it is unable to be used on Balboa, Gecko and Aeware units. 3 Core cable

Balboa ML700 overlay, 8 button .  

Balboa GL Series Spa Controller. GL2000 MK3 with 3kw Heater. All 240volt outputs have AMP sockets. TOUCH PAD IS SOLD SEPERATLY The GL2000M3 can run the following options: Set up 1 1 x circ pump, 2 x 1 speed jet pumps,   1 x blower, 1 x ozone, 1 x AV (non switching 240volt output). 1 x 12V AC light.…

Balboa GL8000 Printed circuit board.PCB fits old and new controllers. 

Balboa ML900 overlay, 12 buttons

Balboa Gl2000M3 Circuit Board,  Fits into new style GL2000 controllers in plastic housing with M7 sensors 

Jets, Temp, Light

p>Face Size: 295 x 80 Hole Size: 250 x 55

Single speed JJ pump cordset. Commonly used on pumps that plug into older style Spa-Quip, Balboa and Gecko Controllers

Suitable for Balboa, Gecko and Hydroquip controllers. Nut is in two pieces and slides over the heater tube and is held together with two screws, once it is screw together the nut has a collar that prevents it sliding off the heater tube.

Blower, Ozone and Circulation pump 1.0mm x 3.0m AMP overmoulded cord set. This cord set is used on Davey/Spa-Quip and SpaNET controllers. Due to overmoulded plug, it is unable to be used on Balboa, Gecko and Aeware units.

Two speed 3m AMP overmoulded pump cordset. This cordset is used on Davey/Spa-Quip and SpaNET controllers. Due to overmoulded plug it is unable to be used on Balboa, Gecko and Aeware units. 4 Core Cable